Create a floor plan of your venue
Not every hall is a rectangle. In Seating Chart Studio you set up the outline of your room yourself – with dimensions, corner points or by clicking on the plan. It is the same planner as for the seating chart – you simply start with the room.
Real dimensions
All lengths are stored in millimeters. Enter meters or switch to feet and inches – the geometry itself does not change.
Rectangle, L-shape, custom outline
Set up a rectangle with width and depth, an L-shape with its cut-out, or place corner points for anything else – as numbers or by clicking. If edges cross, the planner shows it before you apply the room.
Interior walls, columns, doors, windows
Simple symbols for building elements help you place tables realistically.
Areas
Dance floor, stage or DJ, buffet, bar, entrance and freely labeled zones.
Notes instead of blocks
Overlapping tables, items outside the room or very tight gaps are highlighted. You decide what to change.
Print to scale
Print the floor plan fitted to the page or at a fixed scale with a scale bar.
The floor plan is a schematic planning drawing. It does not replace a check of permitted capacity or escape routes.